- Home
- AquaSense Beatbot Pool RobotReturn
- Beatbot Sora P1
Beatbot SORA P1 Cordless Robotic Pool Cleaner – Wi-Fi Connected
- Cordless 3-in-1 cleaning: floor, walls, and waterline all tackled in one complete cycle
- ClearNav navigation: smart pool mapping for full coverage with no missed spots
- 26 m³/h suction: leaves, sand, insects, and oily deposits all effectively removed
- 4-hour runtime, pools up to 240 m²: 7,800 mAh lithium battery built for large pools of any shape
- Upgradeable 150 µm filtration: 5-liter standard basket included, optional ultra-fine 3 µm filter sold separately
- Earn +11,73 € in your loyalty bonus
- Free delivery Express delivery*
- Benefit from Beatbot's 2-year warranty
- 30-day to change your mind*
The Beatbot SORA P1 cordless robotic pool cleaner delivers a complete clean across the floor, walls, and waterline — no cable, no connection to your filtration system required. Simply place it in the water and it starts its cycle automatically, guided by ClearNav intelligent navigation, which maps out methodical paths to cover every inch of your pool. With a 26 m³/h suction rate and a 7,800 mAh lithium battery, it handles pools up to 240 m² on a single charge, regardless of shape or surface type.
What sets the Beatbot SORA P1 RO-SORA-P1 apart:
- Cordless 3-zone cleaning: floor, walls, and waterline covered in a single run
- ClearNav navigation: full pool coverage with no overlapping or missed areas
- 26 m³/h suction power: debris, sand, and insects picked up every cycle
- 150 µm filtration: ultra-fine 3 µm option available separately
- 4-hour floor runtime: handles pools up to 240 m² on one charge
- Dual front/rear brushes: active scrubbing on all surfaces without scratching
- Beatbot 2-year warranty: full coverage on the complete unit
Beatbot SORA P1 cordless robot — 26 m³/h suction, pools up to 240 m²
With the SORA P1, Beatbot delivers a robotic pool cleaner that handles all three zones of your pool without a single cable to unravel or a skimmer connection to set up. Drop it in the water and it gets to work: ClearNav navigation maps the pool and plots sequential cleaning paths so every zone — flat floor, vertical walls, and waterline — is covered systematically. Redundant passes are eliminated, keeping the overall cycle time as efficient as possible.Suction power reaches 26 m³/h, a flow rate strong enough to pick up dead leaves, sand, and lighter organic buildup along the waterline. The dual front and rear brushes actively scrub surfaces to loosen early-stage algae and embedded grime before it gets drawn in. The result is simultaneous mechanical and hydraulic cleaning across every area the robot covers.
Three cleaning modes are selectable directly on the unit: Standard for a full floor-to-waterline cycle, Floor for a quick pass across the pool bottom, and Eco for a light maintenance clean between full cycles that goes easier on the battery. This flexibility lets the robot match the actual condition of your pool rather than running the same cycle every time.
SORA P1 battery and runtime: up to 4 hours for large pools
The 7,800 mAh lithium battery in the SORA P1 delivers up to 4 hours of runtime in Floor mode, enough to cover pools up to 240 m² — rectangular, oval, round, or freeform — on a single charge. In Standard mode, which adds wall and waterline scrubbing to the cycle, effective runtime is naturally shorter as the drive motors work harder against vertical surfaces.At 8.2 kg, the SORA P1 is easy to handle when placing it in the pool and retrieving it at the end of a cycle. The 5-liter filter basket pops off and rinses clean under a hose in seconds. The robot is operational from just 30 cm of depth, allowing it to clean submerged ledges, steps, and shallow platforms found in many pool designs.
SORA P1 filtration: 150 µm standard basket and optional ultra-fine 3 µm filter
The standard filtration system on the SORA P1 captures particles down to 150 µm — fine enough to trap the vast majority of common pool contaminants: sand, algae, fragmented leaves, insects, and organic residue. The 5-liter filter basket offers generous storage capacity, reducing how often you need to empty it even after a thorough clean of a large pool.For pools exposed to pollen, fine dust, or microscopic particles, an optional ultra-fine 3 µm filter is available separately. This add-on captures impurities invisible to the naked eye — particularly useful during flowering season or when reopening your pool in spring. Since it's compatible with the standard basket, switching between filtration levels to suit the season or your pool's specific needs takes no effort at all.
SORA P1 — compatible with every pool shape and surface
The Beatbot SORA P1 works across the full range of residential pool configurations. Rectangular, oval, round, L-shaped, or freeform — ClearNav navigation adapts its cleaning paths to whatever contours it detects. On the surface side, liner, tile, fibreglass shell, painted concrete, and reinforced PVC are all fully supported. The dual brushes scrub without scratching, regardless of the wall or floor material.The robot handles both above-ground and inground pools, with a minimum depth of 30 cm for submerged ledge coverage. Flat floors, gradual slopes, and multi-slope designs are all supported. This broad versatility makes the SORA P1 a practical fit for the vast majority of private pools, with no prior setup or geometry-specific configuration required. The Beatbot 2-year warranty covers every component of the robot. For questions about compatibility with your pool setup or available optional accessories, contact our team — free quote, no obligation.
Frequently asked questions about Beatbot SORA P1 Cordless Robotic Pool Cleaner – Wi-Fi Connected
The Beatbot SORA P1 cleans all three zones: floor, walls, and waterline. Three modes are available: Standard for a full cycle covering all three zones, Floor for a quick pass across the pool bottom, and Eco for a lighter maintenance clean between full cycles — using less battery in the process.
The 7,800 mAh lithium battery delivers up to 4 hours of runtime in Floor mode. In Standard mode — which includes wall and waterline scrubbing — the cycle is shorter, as the drive motors work harder on vertical surfaces. On a single charge, the battery covers pools up to 240 m².
The SORA P1 is compatible with all pool shapes, including freeform, L-shaped, and oval designs. ClearNav navigation adapts its cleaning paths to the contours it detects. The robot also handles submerged ledges and steps from as little as 30 cm depth, covering most standard staircases and shallow platforms.
No, the ultra-fine 3 µm filter is sold separately. The SORA P1 ships with a standard 150 µm filter fitted in the 5-liter filter basket. The 3 µm filter is an optional accessory designed to capture microscopic particles such as pollen or suspended algae.
The SORA P1 works on all common pool surfaces: liner, tile, mosaic, fibreglass shell, painted concrete, and reinforced PVC. The dual front and rear brushes scrub every surface without scratching, regardless of the material. It performs equally well in both inground and above-ground pools.
The SORA P1 does not include a physical remote control. All three cleaning modes are selected directly on the robot before it enters the water. The cycle starts automatically once the unit is submerged. Operation is straightforward and requires no additional accessories.
The 5-liter filter basket detaches easily once you've retrieved the robot from the pool. A quick rinse with a garden hose is all it takes to clear out accumulated debris and dirt. Cleaning the basket after every cycle prevents progressive clogging and keeps the robot's suction performance at its best.
The Beatbot 2-year warranty covers all components of the SORA P1 robot, reference RO-SORA-P1. It applies to the complete unit. For any questions about the warranty, compatibility with your pool, or optional accessories, get in touch with our team for a free quote.
The SORA P1 works just as well in above-ground pools as it does in inground pools. The only requirement is a minimum depth of 30 cm for the robot to activate. All standard above-ground pool surfaces — liner, reinforced PVC — are fully compatible. The maximum supported area remains 240 m² regardless of the pool configuration.
Your rating